CBK 008 intelligent touchless robot car wash machine

Short Description:

CBK008 With hub cleaning, high pressure flushing, spray three kinds of car washing foam.This type of equipment has good quality and favorable price.Cleaning effect is also very good, cleaning a car 3-5  minutes, efficient and fast.

Product Features:

1.Spray the car wash foam at 360 degrees.

2.Up to 12MPa high pressure water can easily remove the dirt.

3.Complete 360° rotating within 60 seconds.

4.Ultrasonic precise positioning.

5.Automatic computer control operation.


  • Min.Order Quantity: 1 Set
  • Supply Ability: 300 Sets/Month
  • Product Detail

    Product Tags

     

    Touchless Car Wash Equipment:

     

    008

    Product Features:

    1.Spray the car wash foam at 360 degrees.

    2.Up to 120MPa high-pressure water can easily remove the dirt.

    3.Complete 360° rotating within 60 seconds.

    4.Ultrasonic precise positioning.

    5.Automatic computer control operation.

    Main Function Introduction:

    main function Instruction
    Flush chassis and hubs system Equipped with the function of cleaning the chassis and wheel hub, the nozzle pressure can reach 8-9 MPa.
    Interated chemical mixing system Automatically adjust the ratio of a variety of liquids, including: ordinary car washing liquid, water flooding coating wax, and no-scrub car washing liquid.
    High-pressure flushing (standard/strong) The water pressure of the water pump nozzle can reach 10MPa, and the robot arms of all equipment wash the body at a constant speed and pressure. Two modes (standard/power) can be selected.
    Water wax coating A macromolecular chloride is generated in the car body, which plays a role in preventing acid rain, pollution, and ultraviolet rays.
    Oil free (reducer 、 bearing) Equipped with NSK bearings originating in Japan as standard, which is oil-free and fully sealed, and is maintenance-free for life.
    Intelligent 3D detection system Equipped with advanced ultrasonic sensors, smart photoelectric sensors and closed-loop controllers, it uses an accurate closed-loop detection system to detect the length of the vehicle to ensure stability, safety, and energy saving.
    Parking guidance system Guide the vehicle to park by reminding lights to avoid danger.
    Intelligent electronic collision avoidance system Carry out vehicle cleaning under the premise of ensuring safety, and carry out safety protection for various emergencies.
    Security alarm system When the equipment fails, the light and sound will prompt at the same time, and the equipment will stop running at the same time.
    Remote control Through the Internet technology, the remote control of the car washing machine is truly realized, including remote start, close, reset, diagnosis, upgrade, operation, remote liquid level monitoring and other operations.
    Standby mode If the device is not used for a long time, it will automatically enter the standby state, which can reduce the energy consumption of the device in the idle state by 85%.
    Fault self-check When the equipment fails, the efficient PLC control system will preliminarily determine the location and possibility of the failure through the detection of various sensors and parts, which is convenient for simple and quick maintenance.
    leakage protection It is used to protect the staff who may get an electric shock in the event of a leakage fault. At the same time, it has overload and short-circuit protection functions, which can be used to protect the circuit and the motor from overload and short-circuit.
    A free upgrade The program version is free to upgrade for life, so that your car washing machine will never be outdated.
    Strengthen the front and rear washing The German PINFL high-pressure industrial water pump is used to ensure that the nozzle water pressure reaches 10MPa, which can truly achieve high-pressure washing and sweep stubborn stains.
    Separation of water and electricity No electrical appliances are exposed to the outside of our mainframe rack, and put the control box and wires in the storage room. This ensures safety and reduces failures.
     Separation of water and foam We set up two pipelines to spray water and foam separately, the single foam tube we designed is more than 2/3 less wasteful than the ordinary car washing machine.
    Direct drive system The use of new direct drive technology has greatly improved the energy saving, safety and stability of the equipment.
    Hot dip galvanized frame double anticorrosive The overall hot-dip galvanized frame is anti-corrosive and wear-resistant for up to 30 years, and can be simply adjusted according to the installation height.
    Frequency conversion energy saving system Advanced frequency conversion technology realizes the stage adjustment of chassis flushing water pressure, body flushing water pressure, and body drying air pressure. Various pressures can be adjusted according to the adjustment of climate and temperature to achieve the maximum optimization of energy saving and cleaning effects.

     

    Introduction of Product Operation Steps:

     

    Step 1  Chassis wash

     

    Adopt Germany PinFL advanced industrial water pump, international quality, real water knife high pressure washing

     

    1

     

    Step 2  High pressure washing

     

    High quality stainless steel 25 degree sector spray, water saving and powerful cleaning is not contradictory

     

    4

     

    Step 3  Foam

     

    Rich bubble is evenly sprayed in every place of the body, so that the car wash effect is better and the car paint maintenance

     

    3

     

    Step 4 Wax rain

     

    Water wax can form a layer of high molecular polymer on the surface of the car paint. If there is a layer of protective cover for the car paint, it can effectively prevent acid rain and pollution

     

    5

     

     

     

    Product Features:

     

     

     
    Main Configuration:

     

     

     

    图片1

     

    图片2

     

    The Installation:

     

    CBK 008 Site Plan

     

    Installation Diagram:

     

    CBK 008 3D Diagram

     

     Company Profile:

     

     

    Factory

     CBK Workshop:

    微信截图_20210520155827

     Enterprise Certification:

    详情页 (4)

    详情页 (5)

    Ten Core Technologies:

    详情页 (6)

     

    Technical Strength:

    详情页 (2)详情页 (3)

     Policy Support:

    详情页 (7)

     Application:

    微信截图_20210520155907

    National Patents:

    Anti-shake, easy to install, non-contact new car washing machine

    Soft protection car arm for solving scratched car

    Automatic car washing machine

    Winter antifreeze system of car washing machine

    Anti-overflow and anti-collision automatic car washing arm

    Anti-scratch and anti-collision system during operation of car washing machine

     

    FAQ:

    1. What's the layout dimensions required for CBKWash installation ? ( Length×width×height )

    CBK108:6800mm*3650mm*3000mm

    CBK208: 6800mm*3800mm*3100mm

    CBK308:8000mm*3800mm*3300mm

    2. What is your biggest car wash size?

    Our biggest car wash size is:5600mm*2600mm*2000mm

    3. How long does your car washing machine take to clean a car?

    Depending on the steps set in the car wash process, it takes 3-5 minutes to wash a car

     微信截图_20210520155928

     

     

     

     

     


  • Previous:
  • Next:

  • Write your message here and send it to us